How to make custom fondant cutters

Custom fondant cutters are cookie cutters tuned for sugar paste: a shorter blade, a thin, clean edge, and often a matching stamp to emboss detail. Roll the fondant about 3 mm thick, dust lightly with cornstarch, press the cutter straight down, and let the shapes firm up before they go on the cake. Here's how to design, print and use your own.

Step 1 — Pick shapes for cake decorating

Step 2 — Build the cutter

You can draw cutters in CAD if you have the time, but I make mine with the 3DGEN cookie & clay cutter generator — upload a silhouette and the cutter is ready in seconds, in the browser, no CAD.

  1. Upload the shape — an SVG, or a high-contrast PNG or JPG — and clean the outline with Detection threshold, Outline smoothing and Invert colors.
  2. Choose the cutter shape: Adaptive to follow the silhouette, or Circle / Rounded rectangle for a plaque with the design inside.
  3. Set the size with Length and Width (or Diameter).
  4. Lower the blade. The default Height of 14 mm is made for cookie dough; fondant sheets are only a few millimeters thick, so a shorter blade is easier to press and clean. The generator goes down to 5 mm.
  5. Keep the wall thin. Wall thickness runs from 0.4 to 2 mm (0.8 mm by default) — thinner cuts cleaner edges in soft fondant, but is more fragile. Keep a Top rim so you have something firm to press on.
  6. Add a stamp if you want embossed detail: leave Generate stamp on and set Relief height (1.5 mm by default). For lettering, mirror the image before uploading — a stamp presses a mirror image of its face.

Step 3 — Print it

Step 4 — Roll and cut

  1. Knead a small amount of fondant until smooth, and keep the rest sealed so it doesn't dry out.
  2. Dust lightly with cornstarch or powdered sugar — too much leaves streaks and dries the surface.
  3. Roll evenly to about 2–3 mm (around ⅛ inch).
  4. Emboss first if you're using a stamp or a textured roller: press the stamp in gently, or roll a pattern across the sheet.
  5. Cut with firm, even pressure straight down, then lift the cutter. Tidy any rough edges with a small modeling tool.

For an all-over pattern, a printed texture roller embosses the whole sheet before you cut.

Step 5 — Dry and attach

Troubleshooting

FAQ

Can I use cookie cutters for fondant?

Yes. A cookie cutter cuts fondant fine, but a shorter blade and a thinner wall make cleaner cuts and are easier to use on thin sheets.

How thick should fondant be for cut-outs?

About 2–3 mm (around ⅛ inch) is typical for cut-out decorations and cookie covers.

Do the same cutters work for polymer clay?

Yes, but keep separate sets — tools used for clay shouldn't go back to food.

Make it with 3DGEN

Upload a silhouette and get a fondant cutter with a matching embossing stamp — free to try, no CAD, all in your browser.

Open the cookie cutter generator →