Plaster Mold Maker

Upload your model

Click to upload or drag an STL here

Upload an STL to start.

Change split direction: Use the Rotate X/Y/Z sliders or drag the rings on the model. The seam always runs through the model centre.

Set up-axis

Rotate X °

Rotate Y °

Rotate Z °

Mold settings

Parts (matrices)

Model size %

Plaster gap (model → wall) mm

Pour hole Ø (at model surface) mm

Formwork wall thickness mm

Registration ball Ø mm

Advanced

Move the pour hole: Slide it across the seam using Pour hole position.

Pour hole position mm

Registration key fit clearance mm

Bed 330×320 mm (Bambu A2L) · drag to rotate