Can you 3D print silicone?
Not on a home 3D printer. Cured silicone is a thermoset — it can't be melted and pushed through a nozzle the way PLA or PETG can — so FDM and standard resin printers can't print real silicone. There are two practical routes instead: print a flexible TPU part, or 3D print a mold and cast real silicone in it. The second gives you genuine silicone, and it's easier than it sounds.
Step 1 — Know why a home printer can't do it
FDM printers work by melting a thermoplastic filament and laying it down layer by layer. Silicone rubber doesn't work that way: it's a liquid that cures by a chemical reaction into a solid that never melts again. Specialist services do print real silicone with industrial machines, but nothing on a hobby printer's spool will give you a silicone part.
Step 2 — Decide what you actually need
- A flexible, rubbery part — a bumper, a grip, a gasket, a phone-case-style cover. TPU printed at home may be enough.
- Real silicone properties — heat resistance, a soft skin-like feel, a food-grade or skin-safe grade, or a mold you cast resin, wax or plaster into. Cast it.
Step 3 — The printable alternative: TPU
TPU (thermoplastic polyurethane) is the flexible filament most home printers can handle. It's rubbery and tough, but it isn't silicone:
- Hardness: common TPU filaments are fairly firm (around Shore 95A); softer grades exist but are harder to print. Mold-making silicones are usually much softer.
- Heat: TPU is a thermoplastic, so it softens with heat — silicone stays stable at temperatures that would deform TPU.
- Printing: TPU prints best on a direct-drive extruder, slowly, with little retraction.
If TPU's feel and heat limits are fine for your part, print it. If not, cast it.
Step 4 — Cast real silicone with a printed mold
This is how most makers get silicone parts at home: the printer makes the mold, and the silicone comes from a two-part kit. There are two cases:
- You want a silicone mold (to cast resin, wax, soap or plaster later): print a master of the shape and a box around it, then pour silicone into the box.
- You want a silicone part (a soft figure, a seal, a stamp pad): print a rigid two-part mold of the part and pour silicone into it.
You can model either in CAD if you have the time, but I make them with 3DGEN in the browser — upload an STL and the printable mold is ready in seconds, no CAD:
- For a silicone mold: the silicone mold box generator builds a box around your master. After Build the box, its Material estimate panel shows how much silicone to mix.
- For a silicone part: the two-part mold generator splits a rigid mold around your model, with a pour hole and alignment pins or a tongue-and-groove seal.
Step 5 — Pour the silicone
- Test for cure inhibition. Platinum silicone can stay tacky against some prints. Dab a little on the printed surface and let it cure; if it stays sticky, seal the print or switch to tin-cure — see why silicone won't cure.
- Mix by weight at the ratio on the data sheet, scraping the cup.
- Pour slowly in a thin stream so air escapes; for a closed two-part mold, pour through the hole until silicone appears at the top.
- Cure fully before opening the mold — the data sheet gives the time.
Choosing between silicones? Platinum vs tin-cure silicone covers accuracy, mold life and food-safe grades.
FAQ
Can a resin printer print silicone?
Standard hobby resin printers can't. Some flexible resins feel rubbery, but they aren't silicone. Real silicone printing uses specialist industrial processes.
Is TPU the same as silicone?
No. TPU is a flexible thermoplastic — usually firmer, and it softens with heat. Silicone is a cured rubber that stays stable at higher temperatures and comes in much softer grades.
What's the easiest way to get a silicone part at home?
3D print a mold and cast it: a printed box for a silicone mold, or a printed two-part mold for a silicone part.
Make it with 3DGEN
Upload an STL and get a printable mold box for silicone, with the silicone volume worked out — free, no CAD, and your files never leave your device.