How to make a 3D printed pet name tag

A 3D printed pet tag is a quick, personal way to put your pet's name — or your phone number — on the collar: type the text, pick a tag shape with a hole, print it in a tough filament like PETG, and hang it on a split ring. One honest note before you start: a printed tag is a great extra, but it shouldn't be your pet's only ID. Keep an engraved tag and a microchip with up-to-date contact details as well.

Step 1 — Decide what goes on the tag

A tag has room for only a few characters, so choose carefully. Pet-ID guidance commonly lists the pet's name, the owner's phone number, and any important medical need; some advise adding an address. The keychain generator takes one line of up to 20 characters, which leaves you two good options:

Step 2 — Design the tag

You could draw a tag in CAD, but I make them with the 3DGEN keychain generator — a keychain tag with a hole is exactly what a collar needs, and it's ready in seconds in the browser, no CAD.

  1. Type the text — the name, or the phone number.
  2. Choose the style. A Geometric plate (rectangle, oval or rhombus) with a hole is the sturdiest; Letter outline wraps the name in one solid outline with a ring fused to the first letter.
  3. Pick a bold, rounded font so the letters stay readable and don't snap.
  4. Size it for the pet. Keep cat tags small and light; dog tags can be larger. Use Text size to set the letters, and keep Thickness around the 3 mm default.
  5. Strengthen the hole. On a small tag, the ring or hole takes all the stress — make the Border generous (in Letter outline mode it's also the ring wall) and set Hole diameter or Ring size to fit your split ring.
  6. Set two colors for the body and the letters so the text stands out.

Step 3 — Print it tough

Step 4 — Attach it safely

Step 5 — Keep the real ID too

Collars can fall off and tags can break. A microchip can't fall off, but it only works if the contact details in the chip's registry are up to date — so check them after a move or a new phone number. A printed tag is a lovely, quick-to-replace addition; an engraved metal tag and a registered microchip are what reliably bring a pet home.

FAQ

What filament is best for a pet tag?

PETG — it's tougher and more moisture resistant than PLA, which suits a tag that gets wet and knocked around.

Can I fit the name and phone number on one tag?

The generator takes one line of up to 20 characters. A short name and number can fit, but at a readable size the tag gets long — two small tags (name and phone) usually work better.

Is a 3D printed tag enough as ID?

Treat it as an extra. Keep an engraved tag with your contact details and a registered microchip as well.

Make it with 3DGEN

Type your pet's name or your phone number, pick a tag shape and export a print-ready tag — free, no CAD, all in your browser.

Open the keychain generator →